Ahsoka Tano's Lightsabers: The Pair, the Colours and the $150-$600 Range

Quick answer: Ahsoka Tano uses two lightsabers, both shorter than a standard blade, and the colours change as her story goes on. That is why buying "an Ahsoka saber" is more confusing than it sounds. Prices in the listings we researched ran from about $150 to $600, and most of that spread is explained by two things: whether you are buying one saber or two, and which core is inside.

Independent guide. Ultralightsaber is not affiliated with, endorsed by or sponsored by Lucasfilm, Disney or any saber maker. Character names are used only to say what we are discussing.

Ahsoka Tano's sabers at a glance

Unlike a single-saber hub, the central purchase question here is "one or two?" and the second question is "what colour, and can the core really show it?"

One saber or a pair?

Many listings for this character sell one saber; some sell both in one box. The answers change everything else:

• Single saber: the lowest cost, and a good option for a display piece or a first purchase. The look at a glance is fine, but you are not holding what the character holds.
• Matched pair: the version most buyers have in mind. Both sabers share one blade diameter and colour and are usually priced as a set. Watch for "pair" listings that include two hilts but only one blade or one charger.
• Mismatched pair: buying a second saber later risks a different finish, a different blade shade and a different core. If you plan a pair, buy it together.

Questions for the seller: How many blades are in the box? How many batteries? How many chargers? Are both hilts the same core?

Why the prices run from $150 to $600

The band is wide, and it is worth taking apart because the hilt shape is not the main driver.

If you see a price near the bottom of the band, assume it is a single saber with a basic core. If it is near the top, assume a pair with a Proffie or a premium finish. Neither assumption is reliable; read the listing.

Colours: why white is the tricky one

The colours in her story change, and a buyer must pick one. Two practical points:

1. Green and blue are easy on every core. A blue Baselit or a green Neopixel will look close to what you expect.
2. White is hard. Mixing white from red, green and blue LEDs rarely gives a clean white. Cheaper builds tend to look pale blue or a slightly warm grey. A good Neopixel with correct tuning, or a Baselit with a white LED, can look cleaner. Whichever you choose, look at a lit-blade photo taken in a dark room, not a render.

Why her blades are white is a story point we will cite from a primary source rather than paraphrase here. For the wider picture on what colours convey and where fans differ from screen facts, see our blade colour guide.

Cores for a pair of shorter sabers

Read the full core comparison for the technology. For Ahsoka specifically:

• Baselit pair: the sturdy and cheapest route. Because there are two sabers, costs add up quickly, and a Baselit keeps that in check. White here depends on the LED in each hilt.
• Neopixel pair: the realistic route. Blades light along their length; a shorter blade is easier to keep consistent in brightness. See Neopixel lightsabers explained.
• Proffie pair: only worth it if you want to tune the sound and colour. Doubling a Proffie is the most expensive and fiddly choice, and two boards must be configured separately.

Handling a reverse-grip pair

A hobby build that is meant to be held in a reverse grip should be judged differently from a standard saber:

• Balance point: a saber held with the blade running back along the forearm needs weight near the hand, not in the pommel. Heavy end caps can feel wrong.
• Hilt length: shorter hilts suit reverse grip. Ask for the hilt length, not only the total length.
• Blade length: shorter blades are less awkward in tight spaces and on a convention floor. See the blade length guide for how to choose.
• Contact: a pair of display or cosplay sabers is not a dueling pair. Unless a maker states that the model is built for contact, treat it as non-contact.

Picks

Picks appear here once partner programmes are approved and each price has been checked and dated.

We have not tested these sabers ourselves unless a row says so. See how we test.

Hilt shape: what we do and do not say

People ask why her hilts look the way they do. The shape is a design choice, and the reasons are documented in behind-the-scenes sources; they are the sort of detail that spreads online with no source. We will cite one rather than guess. For a buyer, what matters is practical: a curved or angled hilt needs a close-up photo to judge grip comfort, and listings describing it as "ergonomic" should be treated as marketing until you see the photos.

What to check before you buy

1. Count the contents: hilts, blades, batteries, chargers.
2. Blade length of each saber.
3. Colour in a lit-blade photo.
4. Core and board version, and whether both sabers share it.
5. Battery access and charge port.
6. Hilt weight, and whether it is stated per saber.
7. Return policy, especially for pairs.